Dahua DH-HAC-HF3231EP 사용자 설명서 - 페이지 13

{카테고리_이름} Dahua DH-HAC-HF3231EP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-HAC-HF3231EP 19 페이지. Hdcvi camera

3 Installation

Important



Please install the device in time after it is taken apart, which is to avoid the camera

module being exposed to damp environment for too long.



Before the installation, please make sure the installation surface can sustain at

least 3X weight of the bracket and the camera.



All figures listed below for reference only.

Please refer to the steps listed below for installation information. See Figure 3-1.



Remove the protection cap from the device. Line up the lens to the lens position of the

camera (Install the C/CS adapter ring to the camera if you are using C type lens).Turn

clockwise to secure the lens firmly.



Insert the socket of the lens cable to the auto iris lens connector on the side panel of the

device. Skip this step if you are using auto iris lens.



Fasten the screw near the focusing ring and then turn counter clockwise to move the

focusing ring out for several millimeters. Now you can focus manually until you get clear

video.



After you completed the focus setup, fix the screw near the focusing ring firmly. Fasten the

focusing ring. Now the installation is complete.

Install Cable

Please follow the steps listed below to install the cable. See Figure 3-2.

Use the small slotted screwdriver to press the corresponding button of cable groove. Insert the

cable into the groove and then release the screwdriver.

Remove Cable

Please follow the steps listed below to remove the cable.

Figure 3-1