Doug's Headers D3300 설치 지침 - 페이지 4

{카테고리_이름} Doug's Headers D3300에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Doug's Headers D3300 4 페이지. 92-96 corvette, 5.7 lt-1/lt4 this vehicle is equipped with

페이지 인쇄

Start the engine and allow it to warm up to operating temperature. Check for any unusual

noises or exhaust leaks. If every thing is OK, stop the engine and tighten all bolts while

the engine is still warm.

NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten

after the first 500 miles and then again at 1000 miles

Be sure that all brake lines and fuel lines are clear of headers and/or connector

pipes.

All spark plug wires, battery cables, or other electrical components should be clear

of headers and/or connector pipes.

If dipstick tube was removed, make sure it is installed properly and that the

dipstick has been replaced.

Double-check the tightness of all bolts including brackets and accessories.

Qty

Description

Left side header

Right side header

Header gasket

Bolt, header, 3/8"-16 x 1"

Lock washer, 3/8"

Bolt, 7/16"-14 x 1-1/4"

Lock washer, 7/16"

Sticker (C.A.R.B., E.O., D-57-19)

Part No. 0110-003061

START THE ENGINE

IMPORTANT CHECK LIST

PARTS LIST

Page 4 of 4

REV3 3-5-13 DSL