Dahua DH-IPC-HDBW4231FN-E2-M 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Dahua DH-IPC-HDBW4231FN-E2-M에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-IPC-HDBW4231FN-E2-M 19 페이지. Dome network camera
Dahua DH-IPC-HDBW4231FN-E2-M에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

Step 9

Select Easy4ip or select Auto-check for updates according to the actual needs. If neither,

leave them unselected.

Step 10 Click OK to initialize the device.

Click the success icon ( ) or the failure icon (

Step 11 Click Finish.

2.2 Changing Device IP Address

● You can change IP address of one or multiple devices at one time. This section is based on

changing IP addresses in batches.

● Changing IP addresses in batches is available only when the corresponding devices have the

same login password.

Step 1

Do Step1 to Step5 in "2.1 Initializing Device" to search devices in your network segment.

After clicking Search setting, enter the username and password, and make sure that they

are the same as what you set during initialization; otherwise there will be wrong password

notice.

Step 2

Select the devices whose IP addresses need to be modified, and then click Batch Modify

IP.

Figure 2-3 Device initialization

) for the details.

Quick Start Guide