Dahua DH-IPC-HDW2831EM-AS-S2 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} Dahua DH-IPC-HDW2831EM-AS-S2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-IPC-HDW2831EM-AS-S2 18 페이지. Active deterrence eyeball network camera
페이지 인쇄
Device initialization and IP address setting can be finished with the "ConfigTool" or in web interface.
For more information, see the Web Operation Manual.
Device initialization is available on select models, and it is required at first use or after the device
being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay in the same network segment.
Plan useable network segment properly to connect the device to the network.
The following figures and interfaces are for reference only, and the actual product shall prevail.
2.1
Initializing Device
Step 1
Double-click "ConfigTool.exe" to open the tool.
Step 2
Click
The Modify IP interface is displayed. See Figure 2-1.
Click Search setting.
Step 3
The Setting interface is displayed.
Step 4
Enter the start IP address and end IP address of the network segment in which you want to
search devices, and then click OK.
All the devices found in the network segment are listed.
Step 5
Select one or several devices with Status shows Uninitialized, and then click Initialize.
The Device initialization interface is displayed.
2
Network Configuration
.
Figure 2-1
Modify IP
4
Quick Start Guide