Dahua DH-IPC-HDW3849HP-AS-PV 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Dahua DH-IPC-HDW3849HP-AS-PV에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-IPC-HDW3849HP-AS-PV 20 페이지. Eyeball network camera
Device initialization and IP setting can be finished with the "ConfigTool" or on web interface.
For more information, see the Web Operation Manual.
● Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
● Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stays in the same network segment.
● Plan usable network segment properly to connect the device to the network.
● The following figures and interfaces are for reference only, and the actual product shall
prevail.
2.1 Initializing Device
Step 1
Double-click "ConfigTool.exe" to open the tool.
Step 2
Click
The Modify IP interface is displayed.
Step 3
Click Search setting.
The Setting interface is displayed.
Step 4
Enter the start IP address and end IP address of the network segment in which you
want to search devices, and then click OK.
All the devices found in the network segment are listed.
Step 5
Select one or several devices in uninitialized status, and then click Initialize.
2 Network Configuration
.
Figure 2-1 Modify IP
4
Quick Start Guide