Baumer GNAMG. 233P Series 매뉴얼 - 페이지 15

{카테고리_이름} Baumer GNAMG. 233P Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer GNAMG. 233P Series 19 페이지. Inclination sensor with profibus-dp interface

페이지 인쇄

1. Example: Write offset on X-axis of the inclination sensor (offset= 5° at 1° resolution)

Step 1:

Output byte 10

Output byte 11

00000000 (0x00)

Step 2:

00000000 (0x00)

To make clear the impact of the parameterized resolution, here is another example for writing the same

offset value (5°) but with another selected resolution of the inclination sensor (0.01°).

2. Example: Write offset on X-axis of the inclination sensor (offset= 5° at 0.01° resolution)

Step 1:

Output byte 10

Output byte 11

00000000 (0x00)

Step 2:

00000000 (0x00)

The offset is saved non-volatile in the EEPROM that provides at least 1 million writing cycles. However, by

frequent preset setting operations induced by software or incidents the service life might be at its end

rather quickly inspite of this very high number of writing cycles. At this point we recommend a certain

carefulness in editing the control software.

Baumer_GNAMG_Profibus_MA_EN

07.18

Output byte 12

Output byte 13

00000000 (0x00)

00000101 (0x05)

00000000 (0x00)

00000101 (0x05)

Output byte 12

Output byte 13

00000001 (0x01)

11110100 (0xF4)

00000001 (0x01)

11110100 (0xF4)

15/19

(Command byte)

Output byte 14

10010001 (0x91)

00010001 (0x11)

(Command byte)

Output byte 14

10010001 (0x91)

00010001 (0x11)

Baumer IVO GmbH & Co. KG

Villingen-Schwenningen, Germany