Dahua DH-IPC-HFW5431EP-ZE 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Dahua DH-IPC-HFW5431EP-ZE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-IPC-HFW5431EP-ZE 17 페이지. Hd ir bullet network camera

No. Port Name

Function

Power

input port

Please refer to Table 1-2 for detailed pin information.

Port Name

I/O Port

1.2 Framework and Dimension

Note

The following figure is for reference only, which is used to know the device dimension.

Please refer to the following figure for dimension information. The unit is mm. See Figure 1-2.

Connector

Function Description

Input DC 12V or AC 24V, please be sure to power the

device according to the label instruction when using

the device.

Note

Please use round port to 2PIN converter cable when

using AC 24V for power supply.

Caution

It may cause damage to the device if it fails to power

the device according to the device label.

Table 1-1

Name

Function description

Alarm output port. It is to output the alarm signal to the

alarm device.

ALARM_NO

NO: normal open alarm output port.

It must be used with ALARM_COM.

ALARM_COM

Alarm output public port.

Alarm input port 1. It is to receive the on-off signal from

ALARM_IN1

the external alarm source.

Alarm input port 2. It is to receive the on-off signal from

ALARM_IN2

the external alarm source.

GND

Ground port

Table 1-2

Figure 1-2