Dahua DH-ITC231 설치 매뉴얼 - 페이지 9
{카테고리_이름} Dahua DH-ITC231에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-ITC231 20 페이지. Camera anpr system
페이지 인쇄
Interface Name
TF card interface
1.5.2 AUX Device
1.5.2.1 8018 Bracket and DH-ITABX-018BA Housing
1）8018 Bracket
8018 bracket is in Figure 1.5-9, parameters as：
Material：die-casting aluminum
Installation method：wall mount
Weight：20kg
Application：DH-ITABX-018BA housing
Weight：1.1kg
Bracket length：120×103×85mm
1.5.2.2 Cable
System cable as：
Network cable：CAT FTP shielding cable
AC220 power line：RVV3＊1.5²；
Camera power line：RVV3＊1.5²；
Flashlight trigger line：RVSP2＊0.5²；
Strobe light trigger line：RVSP2＊0.5²；
1.5.2.3 Pole
Fixed camera use, detailed dimensions are according to installation on site. Level 12 anti-typhoon, and
level 6 antiseismic required.
1.5.2.4 Outdoor Distribution Box
Used to install air switch, lightning protector, signal detector, plug and fiber splice tray. IP54 and built-in
temperature control and fan required.
Connect to TF card. TF card usage note：
When you install TF card, please ensure TF card is not in
reading/writing protection status, and insert it into slot.
When you remove TF card, please ensure TF card is not in
reading/writing protection status, otherwise data may be lost and the
card may be damaged.
Before you hot swap the TF card, please stop record.
Chart 2
5
Function
Figure 1.5-9 8018 bracket appearance