dough Xpress DXP-CRS02 소유자 매뉴얼 - 페이지 8

{카테고리_이름} dough Xpress DXP-CRS02에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dough Xpress DXP-CRS02 12 페이지. Reversible sheeters

3. MOUNTING OF MACHINE

3-1. HOW TO MOUNT THE MACHINE

The machine must be installed on a horizontally-level floor. It should be pleased

in a location that is convenient for both operation and maintenance. The machine

safety features make it possible to stand close to the machine during operation.

Choose a suitable place for installing the machine, observing the minimum distances

from the walls as shown in the figure at the side. These spaces are necessary

for cleaning and routine maintenance operations and also ensure safe operating

conditions without the danger of dragging in and /or crushing.

The room must be provided with adequate lighting and ventilation.

20"

3-2. CONNECTING OF POWER SOURCE

• Qualified personnel in accordance with applicable codes and regulations

should make electrical connections.

• The machine is provided with one single electrical connection with connec-

tion cable at the rear.

• Check that the rating plate voltage corresponds to the mains voltage.

• The machine must be connected to a manual control voltage disconnection

device fitted in an easily accessible position so that the machine electrical

equipment can be separated from the mains when necessary.

• In particular, the system must be installed by a technically and profession-

ally qualified electrician listed in the appropriate register. The installer is

obliged to provide the customer with a declaration of conformity. Old sys-

tems should be checked in order to adapt them to the latest safety regula-

tions and state-of-the-art.

20"