Asus ZenScreen Go MB16AP 사용자 설명서 - 페이지 26

{카테고리_이름} Asus ZenScreen Go MB16AP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus ZenScreen Go MB16AP 28 페이지. Portable usb monitor
Asus ZenScreen Go MB16AP에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (6 페이지), 사용자 설명서 (26 페이지)

페이지 인쇄

3.3

Troubleshooting (FAQ)

Problem

Power LED is not ON

The power LED lights blue

and there is no screen image

Screen image is too light or

dark

Screen image bounces or a

wave pattern is present in the

image

Screen image has color

defects (white does not look

white)

3-12

Possible Solution

• Press the

button to check if the monitor is

in the ON mode.

• Check the "Power Indicator" option in the

OSD main menu, select the "ON" option and

the power LED indicator lights up.

• Check if the Type-C port connected to source

of signal.

• Check if the signal source is ON.

• Connect to the ASUS adapter and check if the

battery is low; if so, charge the battery before

using it.

• Check if the monitor and the computer are in

the ON mode.

• Make sure the USB Type-C cable is properly

connected between the Portable USB Monitor

and the computer.

• Inspect the signal cable and make sure none

of the pins are bent.

• Connect the computer with another available

monitor to check if the computer is properly

working.

• Adjust the Brightness settings via the button.

• Make sure the USB Type-C cable is properly

connected between the Portable USB Monitor

and the computer.

• Move electrical devices that may cause

electrical interference.

• Inspect the USB Type-C cable and make sure

that none of the pins are bent.

Chapter 3: General Instruction