Dahua EBW81200 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Dahua EBW81200에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua EBW81200 16 페이지. Hd fisheye panorama network camera

bidirectional talk function. You can see the button becomes orange after you enabled the bidirectional

talk function. Click Talk button again to stop the bidirectional talk function.

Listening Operation

At the device end, speak via the speaker or MIC, and then you can get the audio at the pc-end.

1.3.2 PC-end to Device-end

Device Connection

First connect the speaker or MIC to the audio input port of the PC, and then connect the earphones to

the audio output port of the PC. Login the Web and then click the "Talk" button to enable the

bidirectional talk function. You can see the button became orange after you enabled the bidirectional

talk function. Click "Talk" button again to stop the bidirectional talk function. Bidirectional talk function

and on-site listening function can't be used at the same time for the device.

Listening Operation

At the PC end, speak via the speaker or MIC, and then you can get the audio at the device-end.

Please refer to Figure 1-5 for more information about alarm setup.

Please follow the steps listed below for alarm input and output connection.

Step 1 Connect the alarm input device to the alarm input port (No.4 pin) of the I/O cable.

Step 2 Connect alarm output device to alarm output port (No.1pin) and alarm output public port

(No.2pin), The alarm output port supports NO (normal open) alarm device only.

Step 3 Open WEB and set corresponding alarm input and output in the alarm setup. Please set the

alarm input 01 port for the first channel of the I/O cable (No.4 pin). Then set corresponding

NO/NC input according to the high/low level signal generated when alarm occurs to the alarm

input device.

Step 4 Set the WEB alarm output. The alarm output 01 is for the alarm output port of the device. It is

the No.1 pin of the I/O cable.

Figure 1-5