Dahua F Series 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Dahua F Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua F Series 18 페이지. Hd ir bullet network camera
Dahua F Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (15 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (15 페이지)

페이지 인쇄
Dahua F Series 빠른 시작 매뉴얼
Dahua HD IR Fixed Network Camera Quick Start Guide
Cable
Port name
Sequence
4
5

1.4 Bidirectional Talk

1.4.1 Device-end to PC-end

Device Connection:
Step 1 Connect the MIC and other pickup to the audio input port of the device combination cable.
Step 2 Connect the earphone to the audio output port of the PC
Step 3 Login the device WEB, click "Talk" button to enable bidirectional talk function. You can
see the button becomes orange after you enabled the bidirectional talk function. Click
"Talk" button again to stop the bidirectional talk function.
Listening Operation
At the device end, input the voice info to the speaker or MIC, and then receive the voice info sent
via earphone and other devices at the pc-end.

1.4.2 PC-end to Device-end

Device Connection:
Step 1 Connect the MIC and other pickup to the audio input port of the PC.
Step 2 Connect the audio output source to the audio output port of the device combination cable.
Step 3 Login the device WEB, click "Talk" button to enable bidirectional talk function. You can
see the button becomes orange after you enabled the bidirectional talk function. Click
"Talk" button again to stop the bidirectional talk function.
Note:
Bidirectional talk function and on-site listening function can't be used at the same time for the
device.
Listening Operation
At the pc end, input the voice info to the speaker or MIC, and then receive the voice info from PC
end sent via earphone and other devices at the device-end.

1.5 Alarm Setup

Cable Port
Function Description
Name
Alarm input port 2. It is to receive the on-off signal
ALARM_IN2
from the external alarm source.
GND
Ground port
Sheet 1-3
4