Dahua HAC-HD3103N 사용자 설명서 - 페이지 6

{카테고리_이름} Dahua HAC-HD3103N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua HAC-HD3103N 17 페이지. 1 megapixel hdcvi icr sync-focus dome camera

1 General Introduction

This series megapixel HD camera conforms to the HDCVI standard. It supports video signal

high-speed long distance transmission without any delay. It can be controlled by the DVR

conforming to the HDCVI.

High-performance CMOS image sensor, megapixel definition.

Default sync-focus lens, coaxial cable to control lens zoom and focus.

Support 75-3 coaxial cable transmission without any loss. Transmission distance is over

500m.

Support HD and standard definition switch.

Support 720P@25, 720P@30, 720P@50, 720P@60.

High speed, long distance real-time transmission.

Support OSD (on-screen display), suitable for user self-defined setup.

Support DC12V power supplying.

Support 3D noise reduction(denoise),excellent performance in low illumination

environment.

Support ICR switch to realize surveillance both in the daytime and at night.

Support intelligent IR function. Max 20m IR distance. (For HAC-HDW3103P/N series only )

Advanced X-Y-Z axis module design, suitable to monitor various zones.

HDCVI Specification

HDCVI（High Definition Composite Video Interface） is an over-coaxial –cable HD video

transmission standard. The technology renders two HD video formats by progressive scanning.

Sync-focus lens

After set focus distance and get clear video, you can realize zoom and focus at the same time.

It can remain clear zoom during the whole focus setup process. You can use the five buttons

on the cable to set. Please refer to chapter 2.2.

OSD

User-friendly on-screen display for you to select the different functions.

ICR

The IR cut removal is to filter the IR light in the daytime and then auto switch to the general

fitter at night. This function allows the camera to output the high sensitivity and clear video.

Smart IR technology