Asus AAM6020BI-T4 사용자 설명서 - 페이지 5

{카테고리_이름} Asus AAM6020BI-T4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AAM6020BI-T4 38 페이지. Cpe (customer premises equipment) adsl 4 port router

페이지 인쇄

Your CPE at a glance

Your CPE has many ports, switches and LEDs. Let's take a look at the different options. Depending upon

your model of CPE, your CPE may have some or all of the features listed below

2.1

Ports and buttons (Back panel)

Power is where you connect the power.

LAN 1~4 (local area network) port: connect to Ethernet network devices, such as a PC, hub,

switch, or router. Some CPEs come with a single LAN connection and some come with four

LAN connections. Depending on the connection, you may need a cross over cable or a strait

through cable.

Reset Button: The reset button is used to reset the CPE to default setting. You may need to

reset the CPE if you loose network connectivity or you loose the ability to interface to the CPE

via the web interface. To reset the CPE, simply press the reset button for about 5-10 seconds

and release. After about 30 seconds the CPE will become operational.

DSL (Line) port: This is the WAN interface which connects directly to your phone line.

2.2

LED description (Front panel)

Power LED: On indicates that the power is supplied to the CPE

Status LED: The Status LED serves two purposes. If the LED is continuously lit, the DSL

interface is successfully connected to a device through the WAN port. If the LED is flickering,

it is an indication that the modem is training.

Activity LED: The Activity LED flash during ADSL data transfer.

LAN 1~4 LED: The LAN's LED serves two purposes. If the LED is continuously lit, the

Ethernet interface is successfully connected to a device through the LAN port. If the LED is

flickering, it is an indication of any network activity.

2.3

LED table & parts list

LED Table

The LEDs can help diagnose problems. If you are using an AAM6030BI CPE, you will have

the LEDs shown in Table 1

Label

POWER

STATUS

ACTIVITY

LAN 1~4

Color

Function

Green

On: Unit is powered on

Off: Unit is powered off

Green

On: ADSL link is established and active

Flashing: Trying to create an ADSL connection

Off: No ADSL link

Green

Flashing: ADSL data transfer

Green

On: LAN link is established

Flashing: Data transfer at LAN connection

Off: No LAN link

Table 1 (Front Panel & LEDs)

AAM6030BI User Manual