Asus AAM60BI 빠른 설정 지침 매뉴얼 - 페이지 20

{카테고리_이름} Asus AAM60BI에 대한 빠른 설정 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AAM60BI 30 페이지. Asus aam60ev; aam60bi; aam60vi adsl routers

The click on Next....

The next screen is where you enter the other IP values that your clients will require: You remember above we said that a

client needs to know an IP address? Well the address values to be assigned to the clients was set-up on the first screen. This

second screen covers the other parameters required i.e. subnet mask, default route (gateway), DNS server address (and

domain name). The broadcast address is the address used by the DHCP server to tell the clients there is a DHCP server here

on the network; the segment address. 255 is the normal value to use to e.g. if your segment is 192.168.2.x then the broadcast

address is 192.168.2.255 or if it's 192.168.1.x then use 192.168.1.255.

Click on Submit and reset the router. Now you need to make sure your clients are set-up to expect IP assignment from the

server.

6.2.2 Setting up Your PC Clients to use DHCP

For simplicity we shall assume you're running Win98 or W2K. However the principles covered are exactly the same for

other operating systems albeit the screen shots will look different!

Go to Start/Settings/Control Panel/Networks. Then select

the TCP/IP protocol entry for your network card and then

click on Properties. To use DHCP click on 'Obtain an IP

address automatically':

Win9x

- 20 -

Win2K

Go to your local network settings (Start/Settings/Network

and Dialup Connections/Local Area

Connection/Properties).