Baumer R600V.DAE0-11228779 운영 매뉴얼 - 페이지 9

{카테고리_이름} Baumer R600V.DAE0-11228779에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer R600V.DAE0-11228779 29 페이지. Off-highway ground & crop radar sensor

2 Integration Guidance

CAUTION

Installation, mounting and adjustment of this product must only be

executed by skilled and authorized personnel.

2.1.1

Mount the sensor with its centre axis approximately perpendicular to the direction of move-

ment and the ground. An angle may affect the measurement due to the Doppler Effect. In field

trials an angle of +/- 10° has been shown to be non-detrimental. Care should be taken to

evaluate influence of the Doppler Effect on the end-result. There is limited compensation for

the Doppler Effect in the software. The distance output is relative to the tip of the lens. A blind

range of 300mm must be considered. No (reliable) measurement is possible within the blind

range of the sensor, though strong targets may be detected. No targets above 6m are de-

tected.

Blind range

Fig 1

Mechanical Setup (for visualization only)

2.1.2

A mounting plate with a flatness of better than 0.2mm per 100mm shall be used. Baumer

recommends soft steel as material to match specified mounting torque. For direct mounting

(thread in plate) Baumer recommends a thickness of the steel plate of at least 6mm. For

mounting on a thinner soft steel plates (≥3mm) flange nuts must be used instead.

R600V.DAE0_manual_1.5 (EN).docm

Last Update: 07 Jan 2021

Center axis

Manual R600V.DAE0 (EN)

Crop distance

Direction of movement

Ground distance

Page 9 of 29