Asus AAM60VI 빠른 설정 지침 매뉴얼 - 페이지 4

{카테고리_이름} Asus AAM60VI에 대한 빠른 설정 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AAM60VI 30 페이지. Asus aam60ev; aam60bi; aam60vi adsl routers

1 Passwords.

Some levels of access in the firmware are password protected. Below shows the default password for the current firmware

version:

name

: adsl

password

: adsl1234

These notes cover basic set-up and configuration of the Asus AAM ADSL routers. In most cases configuration is the same

for all current Asus router models. However the VI model is slightly different because of the wireless set-up. A

supplementary set-up guide is supplied to cover the wireless set-up for that model.

The LAN port on the EV router is the type designed to be connected to an 'uplink' (or crossover) port on a hub. This means

you can also connect the router LAN port direct to the port on a PC LAN card using a standard cat5 LAN cable. If you wish

to connect the router to a 'normal' port on a hub then you will need to use a crossover cable or adapter. For the purposes of

configuration the easiest way is to connect the router directly to the LAN card of a standalone PC. After you have gone

through initial set-up of the router (see below) you can then connect the router to the uplink port of your hub if required.

Simply connect you PC to one of the normal LAN ports on the router using a standard CAT5 LAN cable.

Then refer to the product manual and connect to the ADSL line using RJ11/RJ11 cable as supplied by your provider (if you

don't have a cable then we can supply one for you) from the socket marked 'Line' on the back of the router.

Please note that the author is assuming you are using MS Windows (Win9x or 2K/XP) or Mac OS10; please make

appropriate allowances if using another operating system or platform such as Linux. Please note that if there is some reason

why you cannot do configuration via a web browser then you will have to use console management via the WAN port of the

router connected to the serial port of your PC and then run a terminal application. To do this you will require a 9 pin serial

lead. Details on how to do configuration via the console port are given in the product manual. If you are using console

management then the following sections concerning TCP set-up can be skipped and you can go direct to the section

concerning configuration from the Main Menu.

The easiest way to configure the router is using a standard web browser (e.g. Explorer). You first of all need to check the

TCP/IP settings of your PC. If you already use TCP/IP on your PC for LAN use then this section can be skipped.

Go to Start/Settings/Control Panel/Network....

Win9x

- 4 -

Win2K/XP

Go to Start/Settings/Network and Dialup Connections...

Click on 'Local Area Connection'.