Doughpro Proluxe DP3300BZ 운영 매뉴얼 - 페이지 7

{카테고리_이름} Doughpro Proluxe DP3300BZ에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doughpro Proluxe DP3300BZ 14 페이지. Electromechanical dough press

페이지 인쇄

International Symbols

Power On/Off

Preventative Maintenance Suggestions

The Doughpro DP3300 machines are

relatively maintenance free. For a long

and trouble-free life, the following

preventative maintenance should be

followed:

Daily Care:

1. Teflon coated platens: These

platens should only be cleaned

with mild soap and warm water

then wiped off with a clean, soft

cloth or soft sponge. Never use

steel wool or harsh abrasives or

you will cause costly damage.

*For DP3300M models*

Note that the top plate of the

lower platen is removable

without tools, for cleaning

purposes. To remove, simply

rotate the platen to the full open

position and remove the top

plate.

2. All other exterior surfaces:

Here again a daily wipe down

with mild soap and warm water

will do the job quite nicely.

Never use steel wool or harsh

abrasives or you will cause

costly damage.

Monthly Care:

Piston maintenance: The piston is the

one moving part that requires a grease

injection every two (2) to three (3)

months. A grease port located on the

right side of the upper platen piston is

provided for this purpose. Using a

standard grease gun fitted with an

extension, squeeze a food approved,

high temperature grease into the grease

port. *2 full squeezes from grease gun.

Service Problems:

Contact our factory or approved service

agency (U.S. only). Note: When

contacting factory for information, parts

or service instructions, it is of the utmost

importance that the serial number of the

machine be provided. This number can

be found on the serial plate located on

the rear of the machine.

-6-

DP3300 1410/20003/40002 5/03