Electric Eel Model C 운영 매뉴얼 - 페이지 6

{카테고리_이름} Electric Eel Model C에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electric Eel Model C 6 페이지. Electric sectional drain snake

Step

Work the cable back and forth – by alternating the motor in reverse and forward for a few seconds in each direction –

until the initial opening in the obstruction is made. It is not necessary to let too much cable out of the line. A foot or

two backward and forward several times usually does the job. Repeated slippage may indicate a broken or damaged

pipeline. AVOID slack in the cable between the machine and the pipeline opening – as this is the area where cable will

have a tendency to loop and then kink and become damaged and/or could cause serious injury.

Repeat this operation until flow is established. WHEN POSSIBLE, KEEP PLENTY OF FRESH WATER RUNNING

THROUGH THE LINE WHILE WORK IS BEING DONE. This allows the obstruction, broken loose by the cleaning

tool, to be flushed out. This also allows the cable to be washed off when it is withdrawn from the pipeline. It is

important to wash off the cable in this matter – or with a hose – immediately after the job is completed. This prevents

damage to the cable and tools by the chemicals present in drains and sewers.

After the initial opening is made, reverse the motor to feed the cable out of the line. Use the proper tool to complete the

job.

Occasionally, a tool will hang up on some obstruction and will not feed back. If this happens, put the motor in

forward rotation and pull back on the dolly until the tool is past the obstruction. Then, put the machine in reverse and

the tool will feed out.

OPERATOR'S MANUAL and MORE INFORMATION AVAILABLE AT:

Customer Safety and

Operation Guide

Electric Eel Model C

Electric Sectional Drain Snake

Tool Operation (Continued):

Action

Website:

www.electriceel.com

Toll-Free: 800-833-1212

Email:

Website: