Electric Eel Z5-AF 운영자 매뉴얼 - 페이지 7
{카테고리_이름} Electric Eel Z5-AF에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electric Eel Z5-AF 9 페이지. Drain cleaning machine
Electric Eel Z5-AF에 대해서도 마찬가지입니다: 고객 안전 및 운영 매뉴얼 (2 페이지)
페이지 인쇄
cage/drum in the same direction
as the decal indicates on the
rear of the cage/drum.
4. Attach cable anchor (DN-6) to
end of cable.
5. Grasp cable inside the
cage/drum near the end and
position cable anchor on end so
that the ¼-20 screw can be
inserted through the hole in the
rear of the cage/drum into the
cable anchor.
6. Insert remaining cable into the
cage/drum.
AUTO FEEDER ALIGNMENT
• Disconnect power cord before
any set up or maintenance is
attempted.
• Machine is shipped with auto
cable feeder aligned with
opening in nose cone of
cage/drum.
• If feeder mounting post height
or alignment is altered, loosen
the set screw which attaches the
feeder to the mounting post.
Insert a 5/8" diameter rod
through the feeder and align
with the nose cone opening.
Retighten set screw and locking
nut. Remove the rod from the
feeder. Feed cable back through
the feeder.
MAINTENANCE
• Disconnect power cord before
any set up or maintenance is
attempted.
• Maintenance on the Model Z5-AF
machine should be minimal for
the life expectancy of the
machine.
• The cage/drum/clutch should be
exercised daily.
Exercise as follows:
1. Wearing HEAVY leather gloves,
hold pulley firmly with one hand
and grasp cage/drum with the
other hand.
2. Rotate cage/drum back and forth
several times ensuring that the
cage/drum clutch assembly slips
(the cage/drum clutch assembly
moves while pulley remains
fixed).
CLUTCH ADJUSTMENT
• Disconnect power cord before
any set up or maintenance is
attempted.
• The clutch setting of 35 inch/lbs.
must NEVER be exceeded.
• The clutch setting in most cases
will not need to be adjusted for
the life of the machine.
• If the clutch needs to be reset,
the following procedure should
be used:
7