Baumer AMG 11 설치 및 작동 지침 - 페이지 27

{카테고리_이름} Baumer AMG 11에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer AMG 11 36 페이지. Absolute encoder
Baumer AMG 11에 대해서도 마찬가지입니다: 설치 및 작동 지침 (44 페이지)

Baumer AMG 11 설치 및 작동 지침
7.3
Hinweis für Ex-Schutz
Vor
der
Klemmenkastendeckel(s) prüfen, ob
die
Klemmenkastendeckeldichtung
unbeschädigt ist.
7.4
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Stromkabeln ver-
legt werden.
Kabelabschluss:
1 ... 3 kΩ
Weiß/White = K1 (A+)
Braun/Brown = K1 (A-)
Grün/Green = K2 (B+)
Gelb/Yellow = K2 (B-)
Grau/Grey = Clock (Clock+)
Rosa/Pink = Clock (Clock-)
Schwarz/Black = Data (Data+)
Violett/Violet = Data (Data-)
= Masseanschluss (für die Signale)
Ground (for the signals)
MB086d - 11163626
Montage
des/der
Rot/Red = +UB
Blau/Blue =
Baumer_AMG11-PROFINET_II_DE-EN (19A1)
Elektrischer Anschluss / Electrical connection
7.3

Advice for Ex approval

Check that the seal of the terminal
box(es) is not damaged before moun-
ting the terminal box(es).
7.4

Sensor cable HEK 8 (accessory)

Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used. Con-
tinuous wiring without any splices or cou-
plings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
1 ... 3 kΩ
Aderendhülsen benutzen
Use core-end ferrules
Kabelschirm
Cable shield
7
24