Baumer GBAMW 매뉴얼 - 페이지 19

{카테고리_이름} Baumer GBAMW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer GBAMW 19 페이지. Absolute encoder with powerlink interface
Baumer GBAMW에 대해서도 마찬가지입니다: 매뉴얼 (41 페이지), 매뉴얼 (26 페이지), 매뉴얼 (24 페이지), 매뉴얼 (19 페이지)

페이지 인쇄
Baumer GBAMW 매뉴얼
6.4

Bus cover Power over EtherCAT (PoE)

Based on the IEEE-standard 802.3af, the Baumer EtherCAT encoder with PoE bus cover is interacting as PD
(Powered Device) with a corresponding PSE (Power Sourcing Equipment) module. Signal and power
transmission is by 4-wire standard EtherCAT/Ethernet cable (for example CAT-5). The PSE will identify the
encoder as PD after poweron by the procedure specified in IEEE standard 802.3af.
Encoder supply of 48 V must be provided by an auxiliary PSE module (for example Beckhoff EtherCAT
branch EK1132).
PoE encoder at EK1132 EtherCAT-branch
Run
Power OK
Features
- Functionality compliant to standard IEEE Std 802.3af
- Excess temperature protection
- PoE mains unit galvanically insulated
- Hot-Connect feasible (connecting/disconnecting the device during operation)
Technical data
Poe Leistungsklasse:
PoE supply voltage:
Current consumption:
Cable length:

Manual_EtherCAT_PoE_BIDE_EN.doc

11.11.10
1 (max. 4 W)
44..57 VDC
≤50mA (bei 48 VDC)
max.100 m
19/19
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany