DOUGHXPRESS DM-18 소유자 매뉴얼 - 페이지 4

{카테고리_이름} DOUGHXPRESS DM-18에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOUGHXPRESS DM-18 16 페이지. Manual dough press
DOUGHXPRESS DM-18에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

페이지 인쇄

SETTING TEMPERATURE & TIME

ADJUST TEMPERATURE:

TEMPERATURE

READOUT/SETTING

1. Touch the temperature readout on the display. "UP" ▲ and "DOWN" ▼

arrows will appear on the right side of the display and the temperature

value will start flashing and to indicate it is in set mode.

2. Press the "UP" ▲ or "DOWN" ▼ arrow to change the temperature

value. Holding down on an arrow will change the temperature in 1 de-

gree increments for 10 values; then change to 10 degrees incremental

changes.

3. Once the desired temperature value is set, either press the temperature

value to lock the set temperature or simply wait for 2 seconds and it

will lock in the new value automatically.

ADJUST CYCLE TIME:

TIME

READOUT/SETTING

1. Touch the time readout on the display. "UP" ▲ and "DOWN" ▼ arrows

will appear on the right side of the display and the cycle time value will

start flashing and to indicate it is in set mode.

2. Press the "UP" ▲ or "DOWN" ▼ arrow to change the cycle time value.

Holding down on an arrow will change the time in 1 second increments

for 5 values; then change to 10 seconds incremental changes.

3. Once the desired cycle time value is set, either press the time readout

to lock the cycle time or simply wait for 2 seconds and it will lock in the

new value automatically.

TEMPERATURE ADJUSTMENT SCREEN

UP ARROW

DOWN ARROW

UP ARROW

DOWN ARROW