Baumer HMG11 N29 매뉴얼 - 페이지 11

{카테고리_이름} Baumer HMG11 N29에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HMG11 N29 41 페이지. Absolute encoders with profinet interface

4.3.3.

Manual name assignment

To perform an I/O system network scan, go to „PLC" – „Edit Ethernet Node" – „Browse". The scan provides

all bus nodes. In the example the PLC and encoder „encoder01" was found.

The MAC address serves as a unique identifier. When clicking the button „Flash" the highlighted device will

flash its status-LED so it can be found easily amongst other devices.

A double-click on the desired line (here: encoder "encoder01") opens the window "Edit Ethernet Node"

Enter the new name required for configuration in line „Device name". Click "Assign name" to execute. After

this, the encoder will immediately be recognized with this name in the PROFINET Network.

Baumer_BUDE-PROFINET_MA_EN.docx

14.06.2016 / bja

11/41