Baumer HOG 22 설치 및 운영 지침 매뉴얼 - 페이지 9

{카테고리_이름} Baumer HOG 22에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HOG 22 36 페이지. Incremental encoder
Baumer HOG 22에 대해서도 마찬가지입니다: 설치 및 작동 지침 (36 페이지)

페이지 인쇄

Security indications

3.1

Risk of injury due to rotating shafts

Hair and clothes may become tangled in rotating shafts.

• Before all work switch off all operating voltages and ensure machinery is stationary.

3.2

Risk of destruction due to electrostatic charge

Electronic parts are sensitive to high voltages.

• Do not touch plug contacts or electronic components.

• Protect output terminals against external voltages.

• Do not exceed max. operating voltage.

3.3

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces.

• Never restrict the freedom of movement of the encoder. The installation instructions must

be followed.

• It is essential that the specified clearances and/or angles are observed.

3.4

Risk of destruction due to mechanical shock

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the encoder.

• Never use force. Assembly is simple when correct procedure is followed.

• Use suitable puller for disassembly.

3.5

Risk of destruction due to contamination

Dirt penetrating inside the encoder can cause short circuits and damage the sensing system.

• Absolute cleanliness must be maintained when carrying out any work on the open encoder.

• When dismantling, never allow lubricants to penetrate the encoder.

3.6

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the encoder. Dismounting an encoder, secured to a shaft by adhe-

sive may lead to the destruction of the unit.

3.7

Explosion risk

You can use the encoder in areas with explosive atmospheres of category 3 D and 3 G. The

operation in other explosive atmospheres is not permissible.

MB049 - 11114026

Baumer_HOG22_II_DE-EN (17A1)

Sicherheitshinweise