Baumer HOG 75 KC 설치 및 운영 지침 매뉴얼 - 페이지 5
{카테고리_이름} Baumer HOG 75 KC에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HOG 75 KC 32 페이지. Incremental encoder
페이지 인쇄
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2
The incremental encoder HOG 75 K is an opto electro nic precision measurement device
which must be handled with care by skilled personnel only.
1.3
The expected operating life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.4
The storage temperature range of the device is between -15 °C and +70 °C.
1.5
The operating temperature range of the device is between -30 °C and +85 °C or
-30 °C and +80 °C (depending on the version see section 7), restricted in potentially
explosive environments see section 2, measured at the housing.
1.6
EU Declaration of Conformity meeting to the European Directives.
1.7
The device is UL approved (for version with sensor cable HEK 8 only for an operating tem-
perature range between -20 °C and +80 °C, not applicable for operation in potentially explosive
atmospheres)
1.8
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
The encoder may be only opened as described in this instruction. Repair or mainte-
nance work that requires opening the encoder completely must be carried out by the
manufacturer. Alterations of the device are not permitted.
1.10
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Encoder components are to be disposed of according to the regulations prevailing in the re-
spective country.
i
Warning!
Damaging the seal
MB046a - 11066497
on the device invalidates warranty.
Baumer_HOG75K-A_II_DE-EN (16A3)
1
General notes
2