Baumer HOG 86 M 설치 및 운영 지침 매뉴얼 - 페이지 10

{카테고리_이름} Baumer HOG 86 M에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HOG 86 M 44 페이지. Incremental encoder with clamping element and insert nut
Baumer HOG 86 M에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (28 페이지), 설치 및 운영 지침 매뉴얼 (36 페이지), 설치 및 작동 지침 (40 페이지), 설치 및 작동 지침 (32 페이지)

페이지 인쇄

Vorbereitung / Preparation

Vorbereitung

4.1

Lieferumfang

LED (Option EMS - HOG 86.2)

8.1

Gehäuse

Einseitig offene Hohlwelle oder Konuswelle

mit Schlüsselfläche SW 17 mm

Spannelement

(nur bei einseitig offener Hohlwelle)

Abdeckhaube mit O-Ring

Ejot-Schraube M4x14 mm

Scheibe A4,3, ISO 7090 (Ms) für Erdungsband

Schraube M4x6, ISO 1207 (Ms) für Erdungsband

Version mit Klemmenkasten HOG 86(.2) T

Klemmenkastendeckel

Kombi-Torx-Schraube M4x32 mm

Kabelverschraubung M20x1,5

für Kabel ø5-13 mm

Anschlussplatine,

siehe Abschnitt 7.1.3 und 7.1.4.

Nur Version M (redundante Abtastung):

8.1

Zweiter Klemmenkasten

Version mit Flanschdose HOG 86(.2) F

Flanschdose M23, 12-polig, Stiftkontakte,

rechtsdrehend, siehe Abschnitt 7.2.3.

Schutzkappe

Version mit Anschlusskabel HOG 86(.2) K

Kabelverschraubung M20x1,5

10a

Anschlusskabel, Länge ~1 m

10b



Preparation

4.1

Scope of delivery

Housing

Blind hollow shaft or cone shaft with spanner

flat 17 mm a/f

Clamping element

(only for blind hollow shaft)

Cover with o-ring

Ejot screw M4x14 mm

Washer A4.3, ISO 7090 (Ms) for earthing strap

Screw M4x6, ISO 1207 (Ms) for earthing strap

Version with terminal box HOG 86(.2) T

Terminal box cover

Screw with torx and slotted drive M4x32 mm

Cable gland M20x1.5

for cable ø5-13 mm

Connecting board,

see section 7.1.3 and 7.1.4.

Only version M (redundant sensing):

8.1

Second terminal box

Version with flange connector HOG 86(.2) F

Flange connector M23, 12 pole, male, CW,

see section 7.2.3.

Protection cap

Version with connecting cable HOG 86(.2) K

Cable gland M20x1.5

10a

Connecting cable, length ~1 m

10b

Baumer_HOG86-HOG86M_II_DE-EN (16A3)

10a

10b

MB194 - 11072323