Baumer HOG 86 M 설치 및 운영 지침 매뉴얼 - 페이지 18
{카테고리_이름} Baumer HOG 86 M에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HOG 86 M 28 페이지. Incremental encoder with clamping element and insert nut
Baumer HOG 86 M에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (44 페이지), 설치 및 운영 지침 매뉴얼 (36 페이지), 설치 및 작동 지침 (40 페이지), 설치 및 작동 지침 (32 페이지)
페이지 인쇄
7
Elektrischer Anschluss / Electrical connection
7.3
Mit Flanschdose und Rundsteckverbin-
der
7.3.3
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Motorkabeln ver-
legt werden. Kabelabschluss:
HOG 60: DN ..., DN ... CI:
HOG 60: DN ... TTL, DN ... R:
HOGS 60: DN ..., DN ... R:
Rot/Red = +UB
Blau/Blue =
Weiß/White = A+
Braun/Brown = A-
Grün/Green = B+
Gelb/Yellow = B-
Grau/Grey = R+
Rosa/Pink = R-
Schwarz/Black = ---
Violett/Violet = ---
7.4
Mit Anschlusskabel
7.4.1
Kabelanschluss
* Siehe Seite 7
See page 7
15
7.3
7.3.3
1 ... 3 kΩ
120 Ω
120 Ω
Aderendhülsen benutzen.
Use core-end ferrules.
7.4
7.4.1
*
9a
*
9b
Baumer_HOG60-HOGS60-T1_II_DE-EN (15A1)
With flange connector and mating con-
nector
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used. Continu-
ous wiring without any splices or couplings
should be used. Separate signal cables from
power cables. Cable terminating resistance:
HOG 60: DN ..., DN ... CI:
HOG 60: DN ... TTL, DN ... R: 120 Ω
HOGS 60: DN ..., DN ... R:
Kabelschirm
Cable shield
With connecting cable
Cable connection
MB076T1 - 11072302
1. . . 3 k Ω
120 Ω