Douglas Pro-656 설치 지침 - 페이지 4

{카테고리_이름} Douglas Pro-656에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Pro-656 4 페이지.

페이지 인쇄

Step 3: Backboard and Rim

A. Lower system to the safety stop.

B. With three people, two people hold up

the backboard and the third person

inserts:

2, 3-1/2" bolts

2, 4-1/2" bolts

12, 1/2" nylon washers

4, 1/2" lock nuts

adhesive and place on

backboard at rim location

D. Assemble rim with enclosed

hardware

E. Fasten rim cover under rim

F. Hang Net

G. Check leveling of pole. Pole

should be level in all

directions.

Note: If adjustment is

necessary, adjust system by

rotating the nuts. After system

is level, completely tighten nuts.

Step 4: Height Adjustment Decal

A. Raise system to 6' from rim. (Measuring

from top of rim to the ground.)

B. With a marker, draw a line right above the sleeve

on the inside metal part of the crank system facing

Note: Placing the decals on the front or sides of the

C. Raise system to 7' from rim.

D. Make another mark at edge of sleeve.

E. Continue marking lines at 8' , 9' and 10'

F. Place provided numerical decals on the galvanized

steel to align with the designated height

measurement marks. Note: For accuracy, the black

line on the decal under the numbers should match

up with the determined marker height.

G. Height should now be set. Adjust if needed.

Note: Regulation rim height is 10 feet.

Pro-656

1/2" nylon

1/2" steel washer

1/2" lock nut

1/2" nylon

Figure 9: Backboard and Rim

4-1/2" bolt

1/2" steel washer

1/2" nylon

Figure 10:

Height Adjustment

height

labels

black

protective

sleeve

Turn handle

clockwise

to lower

backboard

rim

NOTE: All hardware for goal

is included in rim package.

3-1/2" bolt

1/2" steel washer

1/2" nylon

10'

mark

here

Turn handle

counter

clockwise

to raise