Douglas UNICOURT 68300B 매뉴얼 - 페이지 2
{카테고리_이름} Douglas UNICOURT 68300B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas UNICOURT 68300B 2 페이지. 10' x 20' rebounder assembly
페이지 인쇄10' x 20' Rebounder Assembly
PARTS LIST
Reference Qty
Description
A
(4)
61-1/4" Tube
B
(10) 61-1/4" Tube with swag
C
(3)
20-1/2" Tube
D
(2)
12" Braces
Qty
Description
(3)
2" i.d. PVC ground sleeves
(1)
Pole Cap
(1)
Rebound Net
(30) Bungee Cords
(20) Adjustable Straps
2'
Fig. 1
2'
1. Sink PVC sleeves to a depth of 2' in concrete that is at least 3' deep; as shown on
the illustration. Note that the center pole is set back from the (2) end poles.
2. Assemble bottom bar over the holes as a guide. Lift off, lay down and finish
assembly of frame on the ground. Use the set screw key to secure poles in fittings.
Be sure the whole frame, including the 1' set backs, are assembled before
installing the net.
3. To install netting hook and fasten bungee cords evenly along sides and top of the
frame. Evenly space and tighten down the 20 adjustable straps along the bottom
of the netting.
4. Attach vinyl skirt at bottom using ty-raps. Thread white webbing into netting at
desired location to simulate net height.
Reference Qty
1
2
3
4
1'6"
3'
Fig. 2
Description
(2)
10-8 Kee Klamp
(2)
15-8 Kee Klamp
(2)
25-8 Kee Klamp
(2)
12-8 Brace Fitting
Qty
Description
(1)
Vinyl Skirt
(10)
Release Ty-raps
(1)
Webbing Strap
(1)
Set Screw Key
2'
2'
Item # 68300B
3'