Asus WL-500g 사용자 설명서 - 페이지 14

{카테고리_이름} Asus WL-500g에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-500g 26 페이지. For 802.11g/b wireless clients
Asus WL-500g에 대해서도 마찬가지입니다: 사용자 설명서 (43 페이지)

페이지 인쇄

Chapter 1 - Introduction

Roaming Between SpaceLink™ Gateways or APs

If there are multiple SpaceLink Home Gateways or Access Points on the

network, then a wireless mobile client may seamlessly roam from one the

SpaceLink Home Gateway or Access Point to another.

Each SpaceLink Home Gateway or Access Point creates its own wireless

cell or coverage area. This is also known as a Basic Service Set (BSS). Any

wireless mobile client can communicate with a particular SpaceLink Home

Gateway or Access Point if it is within the SpaceLink Home Gateway's or

Access Point's coverage area.

If the cells of multiple SpaceLink Home Gateways or Access Points overlap,

then the wireless mobile client may switch from one SpaceLink Home

Gateway or Access Point to another as it travels throughout the facility.

During the hand-off from one SpaceLink Home Gateway or Access Point

to another, the wireless mobile client maintains an uninterrupted connection

to the network. This is known as "roaming."

Multiple SpaceLink Home Gateways connected to a common Ethernet

network form an Extended Service Set (ESS). All members of an Extended

Service Set are configured with an ID, known as the SSID or ESSID.

Wireless mobile clients must be configured with the same SSID as the

SpaceLink Home Gateways or Access Points on the network; a client can

only roam between the SpaceLink Home Gateways or Access Points that

share the same SSID.

SpaceLink Home Gateway