Asus WL-AM602 사용자 설명서 - 페이지 13

{카테고리_이름} Asus WL-AM602에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-AM602 48 페이지. Adsl 2/2+ ethernet/usb combo router

Configuring your computer

Prior to accessing the router through the LAN/USB port, note the following necessary

configurations :

• Your PC's TCP/IP address: 92.68..__( the last number is any number

between 2 and 254)

• The router's default IP address: 92.68..

• Subnet mask: 2.2.2.0

Below are the procedures for configuring your computer. Follow the instructions for the

operating system that you are using.

Windows

2000

1. In the Windows taskbar, click Start > Settings > Control Panel > Network and

Dial-up Connections.

2. Click Local Area Connection. From the Local Area Connection Status screen,

click Properties.

3. The list for the installed network components is displayed. If the list includes

Internet Protocol (TCP/IP), then the protocol has already been enabled, and you

can skip to Step 10.

4. If Internet Protocol (TCP/IP) does not appear as an installed component, then click

Install.

5. In the Select Network Component Type window, click Protocol and then the Add

button.

6. Select Internet Protocol (TCP/IP) from the list and then click OK.

7. If you are prompted to restart your computer with the new settings, click OK.

8. After your computer restarts, click the Network and Dial-up Connections icon

again, and right click the Local Area Connection icon and then select Properties.

9. In the Local Area Connection Properties dialog box, select Internet Protocol

(TCP/IP) and then click Properties.

10. In the Internet Protocol (TCP/IP) Properties dialog box, select Use the following

IP address and key in 92.68..X (where X is any number between 2 and 254)

and 2.2.2.0 in the IP address field and Subnet Mask field.

11. Click OK to save your changes and then close the Control Panel.

WL-AM602 Combo Router User Manual

POWER

STATUS

ACT

LAN

USB