Asus WL-AM604 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Asus WL-AM604에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-AM604 41 페이지. 4-port adsl router
Asus WL-AM604에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지)

페이지 인쇄

Configure your computer

Prior to accessing the router through the LAN port, note the following necessary

configurations :

• Your PC's TCP/IP address: 192.16.1.__( the last number is any number

between 2 and 254)

• The router's default IP address: 192.16.1.1

• Subnet mask: 255.255.255.0

Below are the procedures for configuring your computer. Follow the instructions for the

operating system that you are using.

Windows 2000

1. In the Windows taskbar, click Start > Settings > Control Panel > Network and

Dial-up Connections.

2. Click Local Area Connection. From the Local Area Connection Status screen,

click Properties.

3. The list for the installed network components is displayed. If the list includes

Internet Protocol (TCP/IP), then the protocol has already been enabled, and you

can skip to Step 10.

4. If Internet Protocol (TCP/IP) does not appear as an installed component, then click

Install.

5. In the Select Network Component Type window, click protocol and then the Add

button.

6. Select Internet Protocol (TCP/IP) from the list and then click OK.

7. If prompted to restart your computer with the new settings, click OK.

8. After your computer restarts, click the Network and Dial-up Connections icon

again, and right click the Local Area Connection icon and then select Properties.

9. In the Local Area Connection Properties dialog box, select Internet Protocol

(TCP/IP) and then click Properties.

10. In the Internet Protocol (TCP/IP) Properties dialog box, select Use the following

IP address and key in 192.16.1.X (where X is any number between 2 and 254)

and 255.255.255.0 in the IP address field and Subnet Mask field.

11. Click OK to save your changes and then close the Control Panel.

WL-AM604 4-Port ADSL Router Quick Start Guide

xDSL

LAN

LINK

ACT