Asus WL-AM604g 사용자 설명서 - 페이지 31

{카테고리_이름} Asus WL-AM604g에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-AM604g 34 페이지. Wireless adsl router
Asus WL-AM604g에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 인터넷 구성 매뉴얼 (7 페이지)

페이지 인쇄

Setting up the default gateway

This section allows you to manually set up the default gateway of Internet connection.

1. Click Advanced Setup -> Routing -> Default Gateway to open the configuration page.

2. By default, automatic assigned default gateway is enabled, that is, the router

accepts the first received gateway assignment from ISP. If your ISP specifies a

gateway, uncheck Enable Automatic Assigned Default Gateway and enter the

gateway address.

3. Press Save/Apply to save and activate the settings.

Setting up the static route

For simple networks with only one router, you do not need to set up the static route. For

more complicated network such as an enterprise network where several routers and

different subnets exist, you need to configure static routes so as to direct the network

traffic correctly.

1. Click Advanced Setup -> Routing -> Static Route to open the configuration page

and view the current static route settings. Press Add to create a new static route.

2. The configurable settings include:

• Destination Network: Key in the destination IP address.

• Subnet Mask: Key in the destination subnet mask.

• Use Gateway IP Address: Key in the gateway network address (optional).

• User Interface: Select the interface of your router to which the static route

applies.

3. Press Save/Apply to save and activate the settings.

WL-AM604g 11g WiFi ADSL Router User Manual

xDSL

LAN

LINK

ACT