Baumer Hubner Berlin microGen PMG10 운영 매뉴얼 - 페이지 19

{카테고리_이름} Baumer Hubner Berlin microGen PMG10에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner Berlin microGen PMG10 40 페이지. Absolute encoder
Baumer Hubner Berlin microGen PMG10에 대해서도 마찬가지입니다: 운영 매뉴얼 (44 페이지), 운영 매뉴얼 (40 페이지)

페이지 인쇄

Baumer Hübner

Electrical installation

DANGER

Injury by to secondary damage

Encoder failure or incorrect signals may entail system control errors.

a) Eliminate secondary encoder damage by the relevant safety precautions in the downstream

electronics.

NOTICE

Sensor damage due to faulty power supply.

The sensor can be damaged due to faulty power supply.

a) Operate the sensor only with protected low voltage and safe electrical isolation of protection

class III.

NOTICE

Sensor damage or unintended operation due to work on live parts.

Work on live parts may lead to unintentional operation.

a) Disconnect the power before carrying out any cable.

b) Disconnect the power before connecting or disconnecting electrical connections.

NOTICE

Sensor damage by excessive switching voltage.

The sensor's overload limit is for protection only and not intended as limit for the permanently

switching voltage.

a) Make sure that the maximum permitted switching voltage is not exceeded.

V1 | PMG10 & PMG10P Profibus DP

Operating Manual

Electrical installation