Baumer Hubner Berlin PMG10 설치 및 작동 지침 - 페이지 17

{카테고리_이름} Baumer Hubner Berlin PMG10에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner Berlin PMG10 32 페이지. Absolute encoder
Baumer Hubner Berlin PMG10에 대해서도 마찬가지입니다: 설치 및 작동 지침 (32 페이지), 운영 매뉴얼 (44 페이지)

페이지 인쇄

5.3

Trigger level

Trigger level:

High / Low:

Transmission length:

Output frequency:

5.4

Programming interface (only PMG10P)

Via connection SA and SB, encoder parameters such as the number of pulses for the in-

cremental outputs 1 and 2 and/or the switch-off and switch-on speeds can be changed and

read out� With the Z-PA�SDL�1 WLAN adapter, available as accessory, see

encoder can be accessed via a web browser�

5.5

LED function displays

LED

INC1 (incremental

output 1)

INC2 (incremental

output 2)

Status

Speed

MB261EN - 11196414, 21A1, Baumer_PMG10-Inc_EN_202103_MI_11196414

TTL/HTL (Vin = Vout)

≥2.5 V / ≤0.5 V (TTL)

≥Ub -3 V / ≤1.5 V (HTL)

≤550 m at 100 kHz (TTL)

≤350 m at 100 kHz (HTL)

≤600 kHz (TTL)

≤350 kHz (HTL)

red

Undervoltage, overload,

over-temperature

Undervoltage, overload,

over-temperature

Internal error

Speed higher

switching speed (overspeed)

ELECTRICAL CONNECTION / TRIGGER LEVEL

green

Speed lower

switching speed

section

6.1, the

17/32