Douglas Dynamics 35217 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Douglas Dynamics 35217에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Dynamics 35217 8 페이지. Mount kit for kawasaki mule sx utv 2017-

INSTALLATION INSTRUCTIONS

NOTE: For easier assembly and installation, the

vehicle and all snowplow components should be

on a smooth, level, hard surface, such as concrete.

1. If the vehicle is equipped with a winch, remove the

hook and feed the cable back through the fairlead.

2. Remove and retain the four bolts shown to remove

the brush guard. Retain the fasteners and the brush

guard.

Lit. No. 79257, Rev. 00

3. Remove and retain the four bolts from the front

Front Frame Plate

4. Install the brackets to the front frame plate as

Brush Guard

Bolts

5. Reinstall the brush guard with its original fasteners.

NOTE: If the brush guard does not fit flush against

the brackets, the brackets may be installed in

the incorrect positions. Remove both brackets

and reinstall in the opposite positions, with the

bent flanges facing the center of the vehicle.

frame plate.

Bolts Removed

shown using the fasteners removed in Step 4. The

bent flanges of the brackets face the center of the

vehicle.

Flanges

Brackets

35217

Bent

April 15, 2022