Baumer HUBNER BERLIN PROFI NET microGen HMG10P 설치 및 작동 지침 - 페이지 28
{카테고리_이름} Baumer HUBNER BERLIN PROFI NET microGen HMG10P에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HUBNER BERLIN PROFI NET microGen HMG10P 40 페이지. Incremental encoder with magnetic sensing
Baumer HUBNER BERLIN PROFI NET microGen HMG10P에 대해서도 마찬가지입니다: 설치 및 작동 지침 (32 페이지), 운영 매뉴얼 (44 페이지)
페이지 인쇄
ACCESSORIES
6.
ACCESSORIES
6.1
Z-PA.SDL.1 WLAN adapter: Programming device for HMG10P
The Z-PA�SDL�1 WLAN adapter is a programming device for programming and monitoring
HMG10P/PMG10P series encoders�
The following encoder parameters can be parameterized (depending on the version of the
encoder):
• Incremental output 1 and 2 (number of pulses per revolution)
• Switch-off and switch-on speeds
The programming device can be configured and operated via a web browser.
i
A detailed description of all available functions can be find in the mounting and ope-
rating instructions of the WLAN adapter�
Z-PA�SDL�1 WLAN adapter
6.2
Sensor cable
HEK 8 - Sensor cable with 10 wires for encoder
2 wires 0,5 mm
(signal), cable length on request�
HEK 17 - Sensor cable with 16 wires for encoder
2 wires 0,5 mm
(signal), 4 wires 0,14 mm
cable length on request�
28/40
(power supply), 4 twisted pair signal wires 0,25 mm
2
(power supply), 3 twisted pair signal wires 0,14 mm
2
(signal), 4 wires 0,22 mm
2
MB258EN - 11196411, 21A1, Baumer_HMG10-Inc_EN_202103_MI_11196411
Part number
11190106
(data),
2
2
2