Baumer HUBNER BERLIN Proibus DP HMG 10 설치 및 운영 지침 매뉴얼 - 페이지 7
{카테고리_이름} Baumer HUBNER BERLIN Proibus DP HMG 10에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HUBNER BERLIN Proibus DP HMG 10 32 페이지. Absolute encoder with magnetic sensing
페이지 인쇄
)
2.2
Attention instructions for mounting and operation
Risk of destruction due to electrostatic charge
Electronic parts contained in the encoder are sensitive to high voltages.
» Do not touch plug contacts or electronic components.
» Protect output terminals against external voltages.
)
» Do not exceed max. operating voltage.
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
» Never restrict the freedom of movement of the encoder. The installation instruc-
tions must be followed.
)
» It is essential that the speciied clearances and/or angles are observed.
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the
sensing system.
» Never use force. Assembly is simple when correct procedure is followed.
)
» Use suitable puller for disassembly.
Risk of destruction due to contamination
Dirt penetrating inside the encoder can cause short circuits and damage the optical
sensing system.
» Absolute cleanliness must be maintained when carrying out any work on the open
terminal box.
)
» When dismantling, never allow lubricants to penetrate the encoder.
Risk of destruction due to adhesive luids
Adhesive luids can damage the optical sensing system and the bearings. Dismoun-
ting an encoder, secured to a shaft by adhesive may lead to the destruction of the
unit.
» Do not use adhesive luids for ixing.
MB246EN - 11171695, 16A3, Baumer_HMG10-ProibusDP_II_EN
SAFETy AND ATTENTION INSTRUCTIONS
4/29