Baumer Hubner HMG10 설치 및 작동 지침 - 페이지 20

{카테고리_이름} Baumer Hubner HMG10에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner HMG10 40 페이지. Incremental encoder with magnetic sensing

ELECTRICAL CONNECTION / TRIGGER LEVEL

5.3

Trigger level

Trigger level:

High / Low:

Transmission length:

Output frequency

5.4

Programming interface (only HMG10P)

Via connection SA and SB, encoder parameters such as the number of pulses for the in-

cremental outputs 1 and 2 and/or the switch-off and switch-on speeds can be changed and

read out� With the Z-PA�SDL�1 WLAN adapter, available as accessory, see

encoder can be accessed via a web browser�

5.5

LED function displays

LED

INC1 (incremental

output 1)

INC2 (incremental

output 2)

Status

Speed

20/40

TTL/HTL (Vin = Vout)

≥2.5 V / ≤0.5 V (TTL)

≥Ub -3 V / ≤1.5 V (HTL)

≤550 m at 100 kHz (TTL)

≤350 m at 100 kHz (HTL)

≤600 kHz (TTL)

≤350 kHz (HTL)

red

Undervoltage, overload,

over-temperature

Undervoltage, overload,

over-temperature

Internal error

Speed higher

switching speed (overspeed)

MB258EN - 11196411, 21A1, Baumer_HMG10-Inc_EN_202103_MI_11196411

section

6.1, the

green

Speed lower

switching speed