Baumer Hubner HMG10 설치 및 작동 지침 - 페이지 28

{카테고리_이름} Baumer Hubner HMG10에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner HMG10 40 페이지. Incremental encoder with magnetic sensing

ACCESSORIES

6.1

Z-PA.SDL.1 WLAN adapter: Programming device for HMG10P

The Z-PA�SDL�1 WLAN adapter is a programming device for programming and monitoring

HMG10P/PMG10P series encoders�

The following encoder parameters can be parameterized (depending on the version of the

encoder):

• Incremental output 1 and 2 (number of pulses per revolution)

• Switch-off and switch-on speeds

The programming device can be configured and operated via a web browser.

A detailed description of all available functions can be find in the mounting and ope-

rating instructions of the WLAN adapter�

Z-PA�SDL�1 WLAN adapter

6.2

Sensor cable

HEK 8 - Sensor cable with 10 wires for encoder

2 wires 0,5 mm

(signal), cable length on request�

HEK 17 - Sensor cable with 16 wires for encoder

2 wires 0,5 mm

(signal), 4 wires 0,14 mm

cable length on request�

28/40

(power supply), 4 twisted pair signal wires 0,25 mm

(power supply), 3 twisted pair signal wires 0,14 mm

(signal), 4 wires 0,22 mm

MB258EN - 11196411, 21A1, Baumer_HMG10-Inc_EN_202103_MI_11196411

Part number

11190106

(data),