Baumer Hubner HMG10 설치 및 작동 지침 - 페이지 7

{카테고리_이름} Baumer Hubner HMG10에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner HMG10 40 페이지. Incremental encoder with magnetic sensing

2.2

Attention instructions for mounting and operation

)

Risk of destruction due to electrostatic charge

Electronic parts contained in the device are sensitive to high voltages�

» Do not touch plug contacts or electronic components�

» Protect output terminals against external voltages�

» Do not exceed maximum voltage supply�

)

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces�

» Never restrict the freedom of movement of the device� The mounting instructions

must be followed�

» It is essential that the specified clearances and/or angles are observed.

)

Risk of destruction due to mechanical shock

Violent shocks, e� g� due to hammer impacts, can lead to the destruction of the

sensing system�

» Never use force� Mounting is simple when correct procedure is followed�

» Use suitable puller for dismounting�

)

Risk of destruction due to contamination

Dirt penetrating inside the device can cause short circuits and damage the sensing

system�

» Absolute cleanliness must be maintained when carrying out any work on the

device�

» Never allow lubricants to penetrate the device�

)

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the sensing system and the ball bearings. Dismounting

a device, secured to a shaft by adhesive may lead to the destruction of the device�

» Do not use adhesive fluids for fixing.

MB258EN - 11196411, 21A1, Baumer_HMG10-Inc_EN_202103_MI_11196411

SAFETy AND ATTENTION INSTRUCTIONS

7/40