Baumer PMG10 Series 매뉴얼 - 페이지 4
{카테고리_이름} Baumer PMG10 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer PMG10 Series 41 페이지. Absolute encoders with profinet interface
Baumer PMG10 Series에 대해서도 마찬가지입니다: 설치 및 작동 지침 (32 페이지)
Disclaimer of liability
The present manual was compiled with utmost care, errors and omissions reserved. For this reason
Baumer rejects any liability for the information compiled in the present manual.
Baumer nor the author will accept any liability for direct or indirect damages resulting from the use of the
present information.
At any time we should be pleased receiving your comments and proposals for further improvement of the
present manual.
Registered trademarks
®
®
SIEMENS
, SIMATIC
, Step7
PROFINET Logo and PROFIdrive are registered trademarks of the PROFIBUS user organization respectively
of PROFIBUS International (PI).These names mentioned in the present manual and other names that may be
registered trademarks are not marked correspondingly. Having omitted the respective marking does not
necessarily imply that the names are not registered trademarks or that there are no existing patents and
protected patented designs.
1. Introduction
1.1. Scope of delivery
Please check the delivery upon completeness prior to commissioning.
Depending on encoder configuration and part number the delivery may include:
• Basic encoder with PROFINET bus cover
• CD with GSDML file and manual (also available as download in the Internet at www.baumer.com)
Baumer_BUDE-PROFINET_MA_EN.docx
14.06.2016 / bja
®
®
und S7
are registered trademarks of Siemens AG. PROFINET, the
4/41
www.baumer.com