Baumer PMG10P 설치 및 작동 지침 - 페이지 4

{카테고리_이름} Baumer PMG10P에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer PMG10P 32 페이지. Absolute encoder
Baumer PMG10P에 대해서도 마찬가지입니다: 설치 및 작동 지침 (32 페이지), 설치 및 작동 지침 (36 페이지), 운영 매뉴얼 (44 페이지), 운영 매뉴얼 (44 페이지), 운영 매뉴얼 (40 페이지), 운영 매뉴얼 (40 페이지), 운영 매뉴얼 (40 페이지), 운영 매뉴얼 (36 페이지)

IMPORTENT NOTES

1.1

Symbol guide

Warning

Disregarding could result in serious injury, death or damage to property

)

Attention

Disregarding could result in damage to property or damage/malfunction of the device

Information

Additional information and recommendations

1.2

Intended use

The incremental encoder PMG10/PMG10P is a precision measurement device for the ac-

quisition of speed/position information for the control of drive units and the provision of

electronic output signals for downstream devices�

The device must not be used for any other purpose� The function of the device is descri-

bed in this mounting instruction� The customer must check the suitability for the purpose

intended�

Mounting and selection must be executed by authorized and qualified personnel. Moun-

ting, electrical commissioning or any other work with the device or system is to be perfor-

med by appropriately qualified staff only.

Do not put the device into service if there is any visible evidence of damage�

Do not operate the device beyond the limit values stated in this mounting instruction�

Any risk of personal injury, damage of the system or company equipment due to failure or

malfunction of the device must be eliminated by corresponding safety measures�

Warning

Disregarding intended use could result in serious injury or damage to property�

1.3

Exclusion from liability

The manufacturer is not liable for any damage to persons or property resulting from unin-

tended use of the device�

4/32

MB261EN - 11196414, 21A1, Baumer_PMG10-Inc_EN_202103_MI_11196414