Douglas Dynamics SnowEx Automatixx SPEEDWING 8600 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Douglas Dynamics SnowEx Automatixx SPEEDWING 8600에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Dynamics SnowEx Automatixx SPEEDWING 8600 17 페이지.

페이지 인쇄

Douglas Dynamics SnowEx Automatixx SPEEDWING 8600 설치 지침 매뉴얼

A-FRAME TO HEADGEAR

1. Position the A-frame between the headgear strut

and inner ear, aligning the appropriate hole in the

A-frame that is determined by distance "d."

2. On each side, insert 1" x 4-3/4" clevis pins (from

the shipping bracket) from the outside of the

headgear through the correct A-frame holes.

Secure the clevis pins with 1" ﬂ at washers and

1/4" x 1-1/2" cotter pins found in the parts bag.

1" x 4-3/4"

Clevis Pin

Lit. No. 52308, Rev. 06

INSTALLATION INSTRUCTIONS

Stand Actuator Pin

3. Fold the headgear forward and pin the lift cylinder

to the A-frame using a 2-1/8" x 1/2" clevis pin and

1-1/2" x 5/32" cotter pin from the parts bag.

4. Verify that the stand actuator pin is on top of the

stand.

Stand

1/4" x 1-1/2"

Cotter Pin

1" Flat Washer

May 1, 2021