Douglas Dynamics WESTERN ENFORCER 94040-3 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} Douglas Dynamics WESTERN ENFORCER 94040-3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Dynamics WESTERN ENFORCER 94040-3 19 페이지. Ultramount 2 snowplow

페이지 인쇄

OPERATIONAL TEST AND FINAL ADJUSTMENTS

BLADE DROP SPEED ADJUSTMENT

WARNING

Keep 8' clear of the blade when it is being

raised, lowered, or angled. Do not stand

between the vehicle and blade or directly in

front of the blade. If the blade hits or drops on

you, you could be seriously injured.

The quill in the valve manifold adjusts the blade drop

speed.

1. Lower the blade to the ground before making

adjustment.

2. Turn the quill IN (clockwise) to decrease drop

speed. Turn the quill OUT (counterclockwise) to

increase drop speed.

Quill

3. Stand 8 feet clear of the blade when checking

adjustment.

Lit. No. 74914, Rev. 01

4. Remove and retain the two hairpin cotters,

washers, and clevis pins attaching the lift arm to

the lift frame.

Washer

Clevis

Lift

Arm

5. Pivot the lift arm and lift ram forward and replace

the hydraulic unit cover.

6. Pivot the lift arm and lift ram up. Replace the two

pins, washers, and hairpin cotters to reattach the

lift arm to the lift frame.

Hairpin

Cotters

Washer

Clevis

June 1, 2020