Douglas Dynamics SweepEx ValuSweep Broom VSB-060 매뉴얼 - 페이지 3

{카테고리_이름} Douglas Dynamics SweepEx ValuSweep Broom VSB-060에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Dynamics SweepEx ValuSweep Broom VSB-060 4 페이지. 60" dust mop kit, broom
Douglas Dynamics SweepEx ValuSweep Broom VSB-060에 대해서도 마찬가지입니다: 사용 설명서 및 설치 지침 (14 페이지)

6. Insert one hitch pin through the top holes in the
broom bracket and through the outermost pair of
holes in the mount arm assembly.
NOTE: The hitch pin can stay in this position
whether the mop is in use or not.
Mount Arm
Assembly
Lit. No. 11275, Rev. 01
Hitch
Pin
Broom
Bracket
DUST MOP OPERATION
To use the dust mop, insert a second hitch pin only
through the bottom holes in the broom bracket as
shown below. This allows the mount arm and dust
mop frame to rotate up and down.
When not in use, place the second hitch pin only
through the unused holes in the mount arm assembly
as shown below. This prevents the mop from touching
the fl oor.
Mount Arm
Assembly
3
DMP-060-1
Broom
Bracket
Hitch pin through
broom bracket.
Hitch pin through
mount arm assembly.
February 1, 2019