Dahua E 사용자 설명서 - 페이지 9

{카테고리_이름} Dahua E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua E 18 페이지. Hdcvi eyeball camera
Dahua E에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)

3 Installation

Important



Before the installation, please make sure the installation surface can sustain at

least 3X weight of the bracket and the camera.

Step 1

Hold the decoration ring tightly and unscrew the pedestal anticlockwise.

Step 2

Confirm the installation location and dig holes on the installation surface.

Step 3

Use tools to insert expansion bolts into the installation holes and fix them firmly.

Step 4

Adjust pedestal location (if it is side cable outlet, then pull the cable through the side outlet

cable slot). Align the bolt fixing holes of the device pedestal with the expansion bolt fixing holes

of the installation surface; insert the self-tapping screws into the expansion bolts and fasten

them firmly to fix the pedestal on the installation surface (if it is top outlet, pull the cable

through the outlet hole on the installation surface after the pedestal is fixed firmly).

Step 5

Rotate the decoration ring and fix it slightly, rotate the enclosure and dome body to a proper

monitoring location; connect the video output port of device cable to back-end encoding device,

and connect power port to power; adjust lens focal length and make image clear by adjusting

the zoom/focus screws using screwdriver after the image is displayed on the back-end coding

device; finally rotate the decoration ring firmly.

Figure 3-1