Acer Veriton M6630G 사용자 설명서 - 페이지 21

{카테고리_이름} Acer Veriton M6630G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer Veriton M6630G 38 페이지. Generic user guide

Replace any expansion boards or peripherals that you removed earlier.

Replace the side panels.

Connect the necessary cables and turn on your computer.

Opening your computer

Caution: Before you proceed, make sure that you have turned off

your computer and all peripherals connected to it. Read the

"Preinstallation instructions" on page 10.

You need to open your computer before you can install additional components. See

the following section for instructions.

Turn off your computer and unplug all cables.

Place your computer on a flat, steady surface. If your computer is in the

vertical position, rotate the plastic stabilizers and lay your computer on its

side.

Turn the screws counterclockwise to release the cover.

Hold the sides of the cover with both hands.

Slide it back about an inch and then gently lift it upward to detach it.

Align the cover's hinges to the housing frame; then gently push it in to slide it

back into place.

Secure the cover with the screws.

Certain components of your computer are upgradeable, such as the memory, the

hard disk, the CPU and the expansion cards. You need to observe the "Installation

precautions" on page 10 when installing or removing a computer component.

However, for safety purposes, we do not recommend that you perform these

upgrades yourself. If you want to replace or upgrade any of these components,

contact your dealer or a qualified service technician for assistance.