Baumer CleverLevel PL20H/S 사용 설명서 - 페이지 14

{카테고리_이름} Baumer CleverLevel PL20H/S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer CleverLevel PL20H/S 44 페이지. Level measurement adaptive trigger – hygienic/industrial

페이지 인쇄

CleverLevel

Adaptive trigger – hygienic/industrial

14.3 Window trigger

The window trigger is used to cause a sensor switch to react within a specific range, for example, in order

to isolate a specific medium. The switching window can be configured within a range from 0 ... 100 %. The

window trigger is recommended for detecting and separating different layers, for example oil from water or

foam from beer.

Signal (%)

Good conductive medium

Adhesion from good conductive adhesive

medium

Oily medium

Air

14.4 LED factory settings

LED-Funktion*

SW1

SW2

Error

Short circuit Short circuit

*1 = active, 0 = inactive

14 / 44

Level measurement

PL20H/S

100

Sweep Range (%)

LED color

Green

Yellow

Cyan

Blue

Flashing red

Red

Operating Instructions

Configuration example for a vessel that can be

filled with either a good conductive adhesive

medium (e.g. fruit preparation) or with an oily

medium (e.g. chocolate mix).

Switch windows I and II in this example are set to

achieve the following goals:

to detect the fruit preparation (1)

to exclude adhesion from fruit preparation (2)

to identify the chocolate mixture (3)

For more information, refer to the HELP menu in

FlexProgram.

Window trigger – Output setup

SW1 (NO) / SW2 (NO)

Switch window, min.

Switch window, max.

Switch window, hysteresis

Damping

Color examples

YE = Yellow: SW1 aktiv

CY = Cyan: SW2 aktiv

BU = Blue: SW1 und SW2 aktiv

GN = Green: SW1 und SW2 inaktiv

Factory setting

75,3%

2,4%

0,1 s